Network+ Practice Labs: Implement a Host-based Firewall

source: cybrary.it

Vendor

Lab

Lab Learning Outcomes

CompTIA Network+ N10–007 Exam Objectives

What are we doing?

Why would we want to do this?

Who would use this?

Thoughts?

source: practice labs

Exercise 1

Task 1 — Verify Network Connection

ping plabwin10

Task 1 Complete!

Task 2 — Create a Firewall Rule

Task 2 Complete!

Task 3 — Test the Firewall

ping plabwin10

Task 3 Complete!

Task 4 — Reconfigure the Firewall Rule

ping plabwin10

Exercise 1 Complete!

Exercise 2

Task 1 — Verify that Network Connection is Enabled

ping plabdc01

Task 1 Complete!

Task 2 — Create a Firewall Rule Using Windows Defender Firewall with Advanced Security

Task 2 Complete!

Task 3 — Test the Firewall Rule Created

ping plabdc01

Task 3 Complete!

Task 4 — Reconfigure the Firewall Rule

ping plabdc01

Exercise 2 Complete!

Exercise 3

Task 1 — Configure Firewall to Block Inbound Traffic

netsh advfirewall firewall add rule name="ICMP Allow incoming V4 echo request" protocol=icmpv4:8,any dir=in action=block
ping plabdc01

Task 1 Complete!

Task 2 — Use CLI Commands to Configure the Firewall

netsh advfirewall set allprofiles state off

Task 2 Complete!

Task 3 — Verify the Efficacy of the Firewall Rule

ping plabdc01

Task 3 Complete!

Task 4 — Reconfigure the Firewall Using CLI

netsh advfirewall set allprofiles state on
ping plabdc01

Exercise 3 Complete!

Anxious Buddhist | Hobby Eater | Maze Master